New electrical distribution equipment, built around your projectServing Georgia
Flatbed truck carrying gray electrical cabinets outdoors.

Configurations

Ground Bus Configurations

A ground bus is only useful when its path through the switchboard and its connection to the facility grounding system are clearly specified. For engineers, contractors and purchasing teams in Georgia, the key decisions include bus continuity across sections, available termination points, conductor details and responsibility for the final grounding connection.

Made in USAUL 891 switchboard assemblies — low voltage onlyAccelerated lead times — confirm availability
Project-specific

Define the application and requirements.

Built in the USA

Discuss equipment and assembly options.

Schedule-aware

Confirm lead times for your order.

Define the grounding path

Start with the intended path from each switchboard section to the facility grounding system. The ground bus may provide a continuous equipment-grounding path through connected sections, but the project documents must define how the assembly connects to the site grounding conductor and other required grounding or bonding points. A ground bus does not replace the facility grounding electrode system or settle the complete grounding design.

Share the one-line diagram, switchboard arrangement and applicable project grounding notes when requesting a configuration. Identify the source and destination of the grounding connection, whether the switchboard is service equipment, and any specified grounding or bonding provisions. The engineer of record and authority having jurisdiction determine the applicable requirements for the installation.

Plan continuity between sections

For a multi-section assembly, establish whether the ground bus is intended to run through every section and how continuity is maintained at shipping splits and field-joined sections. The bus layout, splice or connection arrangement, and access for assembly should align with the approved switchboard drawings. Do not assume that physical adjacency alone provides the required electrical continuity.

Provide the section sequence, shipping-break locations and any requirements for field connections before the design is finalized. A project may have constraints from room access, conduit routes or installation sequence. These details can affect where connections are practical and what must be completed on site. The installation instructions and approved documents should identify required assembly steps for qualified personnel.

Specify conductor termination points

Describe where the facility grounding conductor is expected to enter the switchboard and where it must terminate. Useful information includes conductor material and size, the number of conductors, lug or termination requirements, entry direction and available bending space. Confirm whether the conductor lands on the ground bus or on another designated point in the assembly; do not infer a termination from a general one-line symbol.

Conductor selection and termination details depend on the engineered system and applicable project requirements. If the design calls for multiple grounding conductors, parallel paths, a particular lug arrangement or a dedicated bonding connection, include that information in the specification. The manufacturer can coordinate the assembly configuration against the supplied requirements, while the project engineer confirms suitability for the installation.

Coordinate with the facility system

Ground-bus configuration should be reviewed alongside the facility grounding and bonding design, not treated as an isolated switchboard option. Relevant interfaces may include the source equipment, service grounding provisions, downstream distribution equipment and site grounding conductors. The project team must resolve which connections are required and where they occur, especially when the switchboard forms one part of a larger electrical system.

For a replacement or expansion, provide existing-system drawings and clearly identify what remains in place versus what is new. Existing conductor routing, available termination space and established bonding points may limit the choices for a new assembly. Field conditions should be verified by qualified personnel, and changes to the grounding design should be reviewed by the responsible engineer before equipment details are released.

Resolve access and documentation

A well-defined bus arrangement considers installation access as well as electrical intent. Tell the manufacturer about cable entry locations, adjacent equipment, enclosure constraints, room layout and whether connections must be made from a particular side. Such constraints can affect bus placement and conductor routing. Final dimensions and access provisions should be checked against the coordinated drawings before fabrication and site preparation.

At handoff, review the approved drawings for bus continuity, section connections, conductor entry and termination locations. Confirm who supplies field conductors and termination hardware, who completes section-to-section connections, and which inspection or verification steps the project requires. Clear scope boundaries help the electrical contractor plan installation without assuming that the switchboard alone completes the facility grounding system.

Prepare a quote-ready scope

For a quote, send the one-line diagram, section lineup, grounding notes, conductor and lug requirements, entry direction, shipping-break plan and relevant room constraints. Include the project location in Georgia and the requested delivery sequence or site milestones. These details allow the configuration and delivery plan to be reviewed together; exact scope, availability and timeline are confirmed for each order.

Before release, ask the project engineer to confirm the intended grounding path and all required connections, then compare that information with the switchboard drawings. Resolve open points before procurement approval, including field splices, termination responsibility and any constraints on conductor access. This focused review gives the manufacturer, contractor and facilities team a shared basis for supplying and installing the new assembly.

Planning reference

Project specifications

Specifications are confirmed for each order
ScopeRequested by quote
VoltageBased on project requirements
CurrentSpecified to order
ListingDependent on the applicable assembly. UL 891 applies to applicable low-voltage switchboard assemblies, not medium- or high-voltage equipment.
Request a Quote